AL Strip for transformer, also known as transformer copper-clad aluminum, transformer core, etc., is a metal product used to manufacture transformers.

In the production process, the copper plate or steel sheet needs to be rolled into a circular cylinder first; then the iron core is put into the circular cylinder for processing; then its surface is wrapped with insulating material; finally A high-voltage welder welds the coils together.
The manufacturer of AL Strip for transformer tells you that because the transformers produced by this process have the advantages of high corrosion resistance, good heat dissipation performance, and small size, they are widely used in the power industry and electronics industry, and gradually replace ordinary silicon steel sheets. into the transformer.
The various products currently on the market mainly include:
1. Ordinary type: It is mainly suitable for general-purpose distribution transformers with a voltage level of 0.4kV and below, and its capacity ranges from 1 to 1000KVA.
2. Enhanced level: The manufacturer of AL Strip for transformer tells you that it is mainly suitable for the main transformers used in general-purpose distribution substations with a voltage level of 0.4kV and above and the main substations used in the self-provided power plants of factories and mines. Change.
3. Amorphous alloy cored distribution cabinet shell type: AL Strip for transformer manufacturer tells you that it is mainly used in switching stations in low-voltage distribution networks such as switching stations on the backbone lines of power systems above 10kV, ring network switching stations, etc. As well as switch cabinets and related equipment used in low-voltage distribution networks such as switch stations on the outgoing line of power plants.