High-quality-5052 Aluminum Plate is a commonly used aluminum-magnesium alloy material, but many users do not know much about this series of products. Let us explain the specific situation of this series of aluminum plates for you.

First of all, 5052 represents the grade of the product, starting with 5 represents that the product is an aluminum-magnesium alloy product, and then according to the chemical composition, it can be seen that the magnesium alloy content of the product is between 2.2-2.8%, and the density is 2.68. High-quality-5052 Aluminum Plate manufacturers tell you that companies usually take the middle value in the processing process, which is 2.5% magnesium alloy content, so this series of aluminum plates can become almg2.5.
The manufacturer of High-quality-5052 Aluminum Plate tells you that H32 represents the processing state of the product. H can be understood as incomplete annealing and work hardening, that is, the product has been annealed, and its hardness has been reduced for processing and forming. The hardness is too soft, and appropriate work hardening has been carried out. 32 represents that the hardness of the modified product is 1/4 hardness after stabilization treatment.
Hardness grade: Usually the last Arabic number after H is directly related to the hardness value. For example, the last Arabic number of H32, H34, H24, and h18 represents the hardness. In the same grade of aluminum plate, the larger the Arabic number, the higher the hardness. The higher the hardness, for example, the hardness of H34 is higher than that of H32, and the softest state directly becomes the 0 state, which is more suitable as a drawing material. Arabic numerals are taken as even numbers, and 2, 4, 6, and 8 become 1/4, 1/2, 4/3, and full hard as industry terms.
Based on the above, it can be concluded that High-quality-5052 Aluminum Plate is an aluminum-magnesium alloy with a magnesium alloy content of around 2.5%. It has undergone incomplete annealing and hardening processing after stabilization treatment, and its hardness is 1/4. Usually, the product is resistant to Strong corrosion performance, good surface oxidation effect, good bending ability, 90-degree bending without cracking, is a typical sheet metal material, suitable for chassis cabinets and other classic materials that need to be bent.