Aluminium Strip for transformer manufacturers tell you that aluminum has good electrical conductivity, and the electrical conductivity of aluminum in non-ferrous metals is only lower than that of copper. Therefore, aluminum strips are currently used internationally instead of copper strips as a common material for transformers. The following will take you to know how to maintain it.

1. When the aluminum strip is stored, it is forbidden to store it together with chemical data and wettability data.
2. During transportation, the Aluminium Strip for transformer must be covered with sheet cloth to prevent the intrusion of rain and snow.
3. The storage environment of aluminum strip should be dry, bright, well ventilated and non-corrosive climate.
4 During the handling process of the aluminum strip, it is necessary to handle it with care to prevent the appearance from being bruised due to bumps, which will affect the appearance.
5. When the Aluminium Strip for transformer is stored, it is recommended to put the small standard on the shelf. The storage method of the large standard aluminum thick plate is to use a skid at the bottom to isolate the ground from the ground, and insist that the distance from the ground is greater than 10CM; the large standard data At the same time of stacking, it is recommended that the upper and lower materials should be separated by wooden strips/boards and other materials.
The maintenance method of Aluminium Strip for transformer is introduced here, I hope it can help you.