The Aluminum Bus Bar product is a hollow tubular structure with a glossy surface, beautiful appearance and uniform size. The following will take you to understand its technical requirements.

Technical requirements for Aluminum Bus Bar:
1. The nozzle is flat and perpendicular to the axis.
2. The length deviation of the pipe busbar is positive error: +15～+25mm
3. The pipe busbar is allowed to have straightening spiral marks that do not affect the outer diameter size, and its depth does not exceed 0.5mm
4. Bending degree of pipe busbar: m/L<2.0mm
5. The distance between the pipe nut and the matching liner is not more than 0.5mm and can meet the installation requirements.
6. The surface of the bus bar is smooth and smooth, without cracks, wrinkles, inclusions, deformation and distortion.
7. The tube mother material adopts 6063G series, state: T6.
8. The elastic modulus value is to control the deflection value after installation within the specified range.
The above is the introduction of the technical requirements of Aluminum Bus Bar, and I hope it will be helpful to you.