Deep Stramping Aluminum Foil manufacturers tell you that aluminum strip is an aluminum deep-processed product formed by aluminum coil slitting. It is an important raw material in industry.

Deep Stramping Aluminum Foil manufacturers tell you that according to the different alloying elements contained in the aluminum strip, the aluminum strip and the aluminum plate are also divided into 8 series. However, the commonly used series are 1000, 3000, 5000 and 8000 series.
According to the annealing state of the aluminum strip, the aluminum strip can be divided into fully soft (o state) semi-hard (H24) and fully hard (h18). Deep Stramping Aluminum Foil manufacturers tell you that the most commonly used ones should belong to the all-soft series, because the O state is easier to stretch and bend.
The main processing equipment of the aluminum strip is the slitting unit, which can be divided into the required length and width according to the needs. Of course, the equipment for slitting processing is universal, and copper coils can also be processed, and the processed products are called copper strips.
Deep Stramping Aluminum Foil manufacturers tell you that the international raw materials for electronic products no longer rely solely on copper strips. Since the electrical conductivity of aluminum is only lower than that of copper, aluminum strips are becoming an international trend to replace copper strips.